In my previous blog post, I demonstrate how to setup Azure Bastion with Global VNet peering. This blog post can access using this link. In there I used Azure PowerShell for the configuration. Some of the readers asked if it’s possible to set up similar using Azure Portal. Therefore, I am writing this blog post to demonstrate how we can set up Azure Bastion with VNet peering by using the…
If we need to access an Azure VM using RDP or SSH, most of the time we access it using the public IP address. In this way, the virtual machine will have a public IP address (static or dynamic) assigned to it, and RDP or SSH service ports will open to the internet via NSG. This method provides easy access but not a very secure method.
If we have VPN or Express Route connectivity to Azure, we can…
I have a web server running in my on-premises network. I like to allow access to it from the internet via TCP port 443. To do that, I need to create two types of rules in my edge firewall. I need a NAT (Network Address Translation) rule to map a public IP address to the private IP address of the webserver. I also need an ACL rule to allow only relevant traffic (TCP 443). This ensures the traffic…
When we connect two networks via VPN connection, we only allow certain traffic to pass through (In most scenarios). This is the normal security best practice. We normally use a firewall to do this. When it comes to Azure, we may also need to connect virtual networks . In such situation, By using Azure Firewall, we can control the traffic between virtual networks. More info about Azure firewall…
